Yamaha CG TransAcoustic Natural

Nothing sparks creativity like hearing your guitar reverberate throughout a concert hall. The Yamaha CG-TA-NT classical nylon-string guitar gives you that same experience everywhere with reverb and chorus effects built right into the instrument. Get transported to new creative spaces with warm tone and inspiring effects that capture everyone's attention, all without an amp or other external gear. CG-TA-NT guitars combine revolutionary sound and classic craftsmanship for a musical experience unlike any other. It's an immersive playing experience that will leave you and your audience ready for more. Natural finish.

Yamaha CG TransAcoustic Natural

Loading product options

Yamaha CG-TA TransAcoustic classical nylon-string guitars transport you to new creative spaces with immersive reverb and lush chorus effects, without needing an amp or other external gear.

  • Classical body with nylon strings
  • Solid spruce top
  • Ovangkol back and sides
  • On-board reverb and chorus effects – no need for an amp or other external gear

Actuator

An actuator installed on the inner surface of the guitar back vibrates in response to the vibrations of the strings. The vibrations of the actuator are then conveyed to the body of the guitar, and to the air in and around the guitar body, generating authentic reverb and chorus sounds from inside the body.

Simple Controls

Three simple knobs let you adjust the degree of effect applied and the lineout volume level. Additionally, keeping the controls small minimizes the area of the holes in the body material, reducing acoustic sound loss.

(A) Chorus Control

(B) Reverb Control (Room / Hall)

(C) TA Switch / Line Out Volume Control

* Pressing the TA Switch for more than 0.3 seconds activates the TA function.

* When a cable is connected to the line-out jack, the lineout volume can be adjusted by rotating the (C) knob.

* The reverb type switches from Room to Hall around the 12:00 position.

Newly Designed Battery Box

Battery box integrated into the end-pin jack. This requires fewer holes in the body, thus reducing acoustic sound loss. Connect the cable from the jack to a PA or amp to use as an acoustic electric guitar.

 
 
 
 
CG-TA
General Specifications
Body Shape CG
Scale Length 650mm (25 9/16”)
Body Length 490mm (19.29")
Total Length 995mm (39 3/16")
Body Width 370mm (14 9/16")
Body Depth 94-100mm (3.7" - 3.94")
Nut Width 52mm (2.04")
String Spacing * 11.8mm
Top Material Solid Spruce
Back Material Ovankol
Side Material Ovankol
Neck Material Nato
Fingerboard Material Rosewood
Fingerboard Radius flat
Bridge Material Rosewood
Nut Material Urea
Saddle Material Urea
Bridge Pins None
Tuners Gold(RM-1157G-50XA)
Body Binding Rosewood+Black+White
Soundhole Inlay Rosette
Pickguard None
Body Finish Gloss
Neck Finish Matt
Electronics SYSTEM70 TransAcoustic
Controls Reverb / Chorus / Line Out Vol (TA Effect On/Off)
Connections LINE OUT
Strings Trebles:High / Basses:Medium(Yamaha S10)
Accessories 2 x AA Batteries
Case None